(708) 295 9194
Locations
Cart 0
$150.00
Gallon

  • Hurry, Only A Few Left!

Guaranteed SAFE Checkout

  • Product Description
  • shipping & return
Description

High performance, high solids emulsion made for those mainly printing plastisol inks. Designed with high detail and high resolution in mind, images will rinse out effortlessly and screens will reclaim easily when the stencil is properly dried and exposed. 

FEATURES

  • Holds great detail while printing on both the manual or automatic.
  • High solids concentration allows for superior bridging of mesh.
  • Extremely fast exposure time for quicker screen burning.
  • Short run, water resistance if post exposed or hardened.
  • Color: Blue
  • Shelf Life: Opened: 6-8 month

EXPOSURE VARIABLES

Exposure variables depend on mesh count, mesh color, stencil thickness and moisture level in the coated screen. Keep humidity levels below 40% at all times. Use a dehumidifier to ensure proper darkroom humidity levels.

  • Lower mesh = slower exposure / Higher mesh = faster exposure
  • Thicker stencil = slower exposure / Thinner stencil = faster exposure
  • More moisture = Under Exposed and difficult to rinse out / Less moisture = proper exposure and maximum detail resolution.
  • Yellow mesh = slower exposure and more detail resolution/ White mesh = faster exposure

**This item is only available for local pick-up from our Chicago store. Please select local pick-up at checkout.

Shipping

The cost of shipping your order will be calculated using our postcode search at the checkout. Enjoy free shipping with orders over $50. You will be notified once your item has been sent with a tracking number. Additional charges apply to international sales, please contact us for a quote.

Return

Our product comes with a 30-day money-back guarantee. If you are not satisfied with our product, send it back to us for a full refund following our Refund Policy. The return is invalid if the faults are caused by incorrect use or failure to respect the cleaning and care instructions.

Why Avance Vinyl?

“I didn't want to go overboard with toys for my little one since they really don't need much so this was a great purchase. My baby has been using the mat for a few weeks now and I can say that he hasn’t gotten bored of it yet! He loves playing with it laying down and will turn from his back to his tummy and stare at the mat or if he lands just right. I even drug it with me into the living room so I could make dinner. You can easily add different hanging items to make sure your kid doesn't get bored, the stuff that comes with The Complete Kit is great.”

Helen Truax

California, USA

4.9/5 based on 239 reviews

How to Use Heat Transfer Vinyl

It only takes four simple steps to use HTV. 

  1. Cut your design in a reverse pattern on the vinyl. Remove any access from the pattern. 
  2. Preheat the item that the design will be transferred onto for about 2-3 seconds.
  3. Place the design onto the item with medium to firm pressure. Hold it there for 12-15 seconds at 305 degrees Fahrenheit (150 C).
  4. Once the product and transfer are completely cool, peel off the backing to reveal your final design. 

Safe To Use on

100% Cotton

Cotton & Polyester Blend

100% Polyester


Frequently Asked Questions

I made a mistake how do I remove a vinyl?

Heat transfer vinyl can be removed from the fabric using acetone or a sharp scraping edge such as an X-acto knife or scissors.

Can I use Fabric Softeners on this?

Yes, our heat transfer vinyl is safe for use with all conventional fabric softeners!

How long do they last?

Our heat transfer vinyl can go through dozens to hundreds of wash cycles before showing any signs of cracking or fading!